Up Kurzweil K2000 Keys Prev Next Slideshow

 Previous image  Next image  Index page  Original Image [DSC_9313.jpg - 3.9MB]
 
 
 
DSC_9305
DSC_9312
  DSC_9313.jpg - Gently pull up on the ribbon cables and they will come out of the sockets. Note the position of the red marking on the ribbon cable. This indicates "pin1" and you must match this up if you want the keys to work properly (the socket is also keyed so the connector only fits one way, but regardless...) 
 Don't lose the black metal brackets! You may want to place them back onto the sockets for safekeeping.  
DSC_9304
DSC_9328
DSC_9329
DSC_9320
DSC_9319

Gently pull up on the ribbon cables and they will come out of the sockets. Note the position of the red marking on the ribbon cable. This indicates "pin1" and you must match this up if you want the keys to work properly (the socket is also keyed so the connector only fits one way, but regardless...)
Don't lose the black metal brackets! You may want to place them back onto the sockets for safekeeping.
Total images: 26 | Last update: 2/16/08 2:54 PM | Help