Up MPL SCSI PC Card Reader and Kurzweil K2000 Prev Next Slideshow

Previous image Next image Index page Original Image [DSC_0820.jpg - 4.2MB]
DSC_0818
DSC_0816
DSC_0808
DSC_0809
DSC_0811
  DSC_0820.jpg - Set the SCSI ID to a number that is not in use. The Kurzweil is 6 by default. I set the MPL Card Reader to SCSI ID 1, and it will also use ID 2 for the upper slot. Set the first DIP switch in the down position to turn OFF parity. Set the second DIP switch to ON to terminate the SCSI chain. Connect your 50 pin high density SCSI cable.  
DSC_0822
DSC_0823
DSC_0824
DSC_0826
DSC_0832

Set the SCSI ID to a number that is not in use. The Kurzweil is 6 by default. I set the MPL Card Reader to SCSI ID 1, and it will also use ID 2 for the upper slot.
Set the first DIP switch in the down position to turn OFF parity.
Set the second DIP switch to ON to terminate the SCSI chain.
Connect your 50 pin high density SCSI cable.
Total images: 14 | Last update: 1/30/08 3:49 AM | Help